SCROLLNADO Dust collection for the scroll saw (Dewalt DW 788, Delta 40-690)
$ 34.32$ 20.59
Availability: 10 in stock
Condition:New
Brand:Scrollnado
All returns accepted:ReturnsNotAccepted
Type:Scroll Saw
Battery Included:No
Description
Size Guide
Description
We are excited to introduce a new dust collection accessory for the scroll saws. SCROLLNADO works with some of the most popular scroll saws (Dewalt DW 788, Delta 40-690, 40-694, and 40-695). Our innovative accessory collects wood dust right its source, very near the scroll saw blade. In addition, SCROLLNADO collects dust below and above your wood workpiece collecting almost all of the dust that is created. This accessory easily installs in minutes with no modification to your scroll saw. We use thin walled tubes to put the vacuum near the source, right at your blade (above and below your workpiece). Because we use a thin walled tube, there is no risk of harming your scroll saw if the scroll saw arms strikes the dust collection tube. The result is placing the dust collection right at the source collecting nearly all of the dust created. Below your workpiece (and scroll saw table), the scroll saw blade actually passes through holes in the dust collection tube. The tube actually surrounds the blade under the table (hard to get much closer). Any dust that would have fallen below the table get sucked into our dust collection tube before it can get very far. Above your wood workpiece, the dust collection tube is held in place magnetically on the upper scroll saw arm. Although the dust collection tube is thin walled, it is rigid enough to position the vacuum tube very close to the scroll saw blade positioning it from a distance. The top dust collection tube is positioned behind the scroll saw blade and above your workpiece. As a result, it is completely our of your way and does not block your view. SCROLLNADO’s dust collection tube has a 1” outside diameter. It fits into the inside diameter of many popular 1 1/4” dust collection hose fittings. In addition, many dust collection reducer fittings have a 1 1/4” diameter. Please note: Scroll saw not included.