-40%

3 to 3.5 Ton, W 21 x H 30 x D 21, Painted Cased Evaporator Coil

$ 343.2

Availability: 83 in stock
  • Condition: New
  • Type: Evaporator Coil
  • Compatible Product: Air Conditioner Split System, Central Air Conditioner, Central Furnace, Central Heating Radiator, Dual Fuel Split Air Conditioning System, Ducted Evaporative Cooler, Whole House Air Conditioner & Heater
  • Cooling Capacity: 3.5 ton
  • Item Weight: 63
  • Model: CAPF3743C6
  • Color: Gray
  • Material: Aluminum
  • Brand: Goodman

    Description

    This is a cased evaporator coil with a cooling capacity of 3.5 ton. It measures W 21 x H 30 x D 21, and is painted in gray color. The brand is Goodman, and the model is CAPF3743C6. It is compatible with various products such as ducted evaporative cooler, central furnace, whole house air conditioner & heater, central air conditioner, central heating radiator, air conditioner split system, and dual fuel split air conditioning system. The item weight is 63 lbs. This evaporator coil is perfect for your heating, cooling & air needs.
    The Goodman® CAPF Cased Upflow/Downflow Indoor Coils are made for split system air conditioners and heat pumps. The coil’s cabinet is painted Architectural Gray.
    This coil can operate with a heat pump or condenser of two different tonnages, as noted in the product description above. The unit comes equipped with an orifice (flowrater) for the larger listed tonnage. If you wish to pair the coil with a condenser or heat pump of the smaller tonnage, an orifice in that tonnage will need to be used (unless a TXV is required instead). If you are purchasing a new Goodman heat pump or condenser, the required orifice can be found on our site by clicking the Accessories tab on the product page for that item. However, if you are purchasing this coil only and wish to pair it with equipment of the lower tonnage rating as listed on the description for this coil, you will need to separately purchase the smaller orifice and install it in the coil before operating. See this step-by-step guide to learn how to easily do so. Alternatively, instead of an orifice a thermostatic expansion valve (TXV) may be used or required for some equipment, such as 14 SEER and higher heat pumps and all equipment that uses R-410A refrigerant
    Standard Features
    Suitable for use with R-410A and R-22 refrigerants
    Rust-proof, high-temperature, thermoplastic drain pans feature a low water-retention design
    Available with check flowrater expansion device for heat pump or cooling-only applications
    Rifled tubing and corrugated aluminum fin coils
    Foil-faced insulation
    Cabinet Features
    High-quality post-paint cabinet
    Split-seam front for easy access